Shure
PGA57
Dynamic · Cardioid · 70–15,000 Hz
- The budget SM57: same 150 Ω output and nearly the same sensitivity, starting at 70 Hz instead of 40.
- Those missing bottom two octaves are why it sounds thinner on a guitar cab than the mic it is modelled on.
Frequency response
No response curve yet.
MicSense only draws a curve traced from a graph the manufacturer actually publishes — it never estimates one from the microphone’s class. Shure publishes figures for the PGA57 but no response graph, so the numbers are in the spec table below and the chart stays empty.
Polar pattern
Generated from the first-order directivity formula for cardioid. It illustrates the pattern type — it is not a measurement of this individual model.
Specifications
| Manufacturer | Shure |
|---|---|
| Model | PGA57 |
| Type | Dynamic |
| Form factor | End-address |
| Polar pattern | Cardioid |
| Frequency range | 70–15,000 Hz |
| Sensitivity | 1.5 mV/Pa · -56.5 dBV/Pa |
| Max SPL | — |
| Self-noise | — |
| Impedance | 150 Ω (output) |
| Connector | XLR3M |
| Powering | None (dynamic) |
| Weight | 280 g |
| Price tier | Budget |
| Introduced | — |
Every figure above is from Shure’s own published datasheet for this model — see the datasheet. A dash means the manufacturer does not publish that figure; it does not mean zero.
What it gets used for
- Snare top
- Guitar cab
- Horn / brass
MicSense tags microphones by the job on a live stage, not by studio category — so you can filter for “kick in” or “monitor vocal” instead of working backwards from “large-diaphragm condenser”.
Compare it against the alternatives.
MicSense lets you put up to four microphones side by side — spec table, overlaid response curves and polar diagrams on one screen. Free with a free Squaresmile account.