sE Electronics
V7 X
Dynamic · Supercardioid · 30–19,000 Hz
- The V7 capsule in an instrument body — same 2.0 mV/Pa output, but the response reaches 10 Hz lower and stays flat instead of lifting the presence.
- Flat from about 150 Hz to 1 kHz with a gentle 2–3 dB shelf above 2 kHz: a snare mic that needs less low-mid taken out than an SM57.
Frequency response
Read off sE Electronics’s published response graph and re-drawn on the fixed MicSense scale (20 Hz–20 kHz, −20 to +15 dB), so two microphones can be compared at a glance. Points between the entered coordinates are interpolated — no data has been invented to smooth the curve.
Polar pattern
Generated from the first-order directivity formula for supercardioid. It illustrates the pattern type — it is not a measurement of this individual model.
Specifications
| Manufacturer | sE Electronics |
|---|---|
| Model | V7 X |
| Type | Dynamic |
| Form factor | End-address |
| Polar pattern | Supercardioid |
| Frequency range | 30–19,000 Hz |
| Sensitivity | 2 mV/Pa · -54.0 dBV/Pa |
| Max SPL | — |
| Self-noise | — |
| Impedance | 300 Ω (electrical) |
| Connector | XLR3M |
| Powering | None (dynamic) |
| Weight | 269 g |
| Price tier | Mid |
| Introduced | — |
Every figure above is from sE Electronics’s own published datasheet for this model — see the datasheet. A dash means the manufacturer does not publish that figure; it does not mean zero.
What it gets used for
- Snare top
- Guitar cab
- Toms
- Horn / brass
MicSense tags microphones by the job on a live stage, not by studio category — so you can filter for “kick in” or “monitor vocal” instead of working backwards from “large-diaphragm condenser”.
Compare it against the alternatives.
MicSense lets you put up to four microphones side by side — spec table, overlaid response curves and polar diagrams on one screen. Free with a free Squaresmile account.