Shure
PGA48
Dynamic · Cardioid · 70–15,000 Hz
- Starts at 70 Hz — the highest low-frequency limit of any vocal microphone here, and a deliberate one: nothing below a voice gets in.
- 600 Ω output, four times an SM58's: a long cable run into a cheap input loses more top than it would with a 150 Ω mic.
Frequency response
No response curve yet.
MicSense only draws a curve traced from a graph the manufacturer actually publishes — it never estimates one from the microphone’s class. Shure publishes figures for the PGA48 but no response graph, so the numbers are in the spec table below and the chart stays empty.
Polar pattern
Generated from the first-order directivity formula for cardioid. It illustrates the pattern type — it is not a measurement of this individual model.
Specifications
| Manufacturer | Shure |
|---|---|
| Model | PGA48 |
| Type | Dynamic |
| Form factor | Handheld |
| Polar pattern | Cardioid |
| Frequency range | 70–15,000 Hz |
| Sensitivity | 2.1 mV/Pa · -53.5 dBV/Pa |
| Max SPL | — |
| Self-noise | — |
| Impedance | 600 Ω (output) |
| Connector | XLR3M |
| Powering | None (dynamic) |
| Weight | 300 g |
| Price tier | Budget |
| Introduced | — |
Every figure above is from Shure’s own published datasheet for this model — see the datasheet. A dash means the manufacturer does not publish that figure; it does not mean zero.
What it gets used for
- FOH vocal
- Lectern / podium
MicSense tags microphones by the job on a live stage, not by studio category — so you can filter for “kick in” or “monitor vocal” instead of working backwards from “large-diaphragm condenser”.
Compare it against the alternatives.
MicSense lets you put up to four microphones side by side — spec table, overlaid response curves and polar diagrams on one screen. Free with a free Squaresmile account.