Sennheiser
e 825 S
Dynamic · Cardioid · 80–15,000 Hz
- The entry evolution vocal mic, and the only one in the range that starts at 80 Hz — the low end is cut in the capsule, not on the desk.
- The S suffix is the on/off switch; the plain e 825 is the same microphone without it.
Frequency response
No response curve yet.
MicSense only draws a curve traced from a graph the manufacturer actually publishes — it never estimates one from the microphone’s class. Sennheiser publishes figures for the e 825 S but no response graph, so the numbers are in the spec table below and the chart stays empty.
Polar pattern
Generated from the first-order directivity formula for cardioid. It illustrates the pattern type — it is not a measurement of this individual model.
Specifications
| Manufacturer | Sennheiser |
|---|---|
| Model | e 825 S |
| Type | Dynamic |
| Form factor | Handheld |
| Polar pattern | Cardioid |
| Frequency range | 80–15,000 Hz |
| Sensitivity | 1.5 mV/Pa · ≈ -56.5 dBV/Pa |
| Max SPL | — |
| Self-noise | — |
| Impedance | 350 Ω (nominal) |
| Connector | XLR3M |
| Powering | None (dynamic) |
| Weight | 330 g |
| Price tier | Budget |
| Introduced | — |
Every figure above is from Sennheiser’s own published datasheet for this model — see the datasheet. A dash means the manufacturer does not publish that figure; it does not mean zero.
What it gets used for
- FOH vocal
- Monitor vocal
- Lectern / podium
MicSense tags microphones by the job on a live stage, not by studio category — so you can filter for “kick in” or “monitor vocal” instead of working backwards from “large-diaphragm condenser”.
Compare it against the alternatives.
MicSense lets you put up to four microphones side by side — spec table, overlaid response curves and polar diagrams on one screen. Free with a free Squaresmile account.